ODBC Thin Client Single User Installation, Client Machine, Fat Client NOT Installed (Post Service Pack 22)
You have started the installation of the jdeDirect One World ODBC driver and having completed the common download functionality, the following Welcome to the Configure E1 Connection Tool is displayed.
Three options are available to you.
The installation route depends on your PC setup. In this example the driver is being installed on a PC without a Fat Client installed. Therefore, the Typical and Gateway Service route options are the same and it does not matter which option is selected. You will be taken down the Gateway Service route, therefore ensure that you have installed the Gateway Service before continuing.
Leave the default as Typical:
The next screen asks for the IP address and Port number of the Gateway Service which is required if a Fat Client is not available.
If this is the first time the driver has been installed the Gateway IP will have 1.1.1.1 as default. Enter the known IP address.
It is suggested that the Port number is left as the default option. If it is necessary to manually define the Port ID select the check box to activate the field and make the required change. (This should be done in collaboration with your IT Department).
If the Gateway IP Address is left as the default or not a valid server then an Error message will appear.
Note: This Error message might appear when the correct IP address and port numbers have been input. If it persists and the Gateway Service is definitely running then it is suggested that the Gateway Service is 'Restarted' in the Gateway Service Manager.
On selecting OK from the Error screen the Complete Wizard screen will appear but a warning to run the installation manually from the Control panel. See full details under Control Panel options.
Once the correct IP Address has been input, the JDE Login details screen will appear.
Enter your JDE User ID, JDE User Password and Environment details.
If entered correctly the E1 Connection completed successfully screen is displayed and the driver installation is complete.
After successful implementation of the driver you will be asked to complete License details.
Finally if the Unity Universal Table Browser (UTB) is not installed, you will be asked if you wish to install now?